MDH
mhmedia separatorpulsedutycycle
Magnus_VLF
This parameter configures the duration that the separator is on for each pulse
while the picker is moving up after grabbing the plate. The pulsing will occur
between the picker motion counts specified by the PickerMotionCountSeparatorOn
and PickerMotionCountSeparatorOff parameters. A pulse duty cycle of zero means
do not pulse the separator. If the pulse duty cycle is set higher than the
pulse interval, the separator will not be pulsed.
This parameter is available.
Please issue the appropriate monitor command to determine this parameter's default value.
0 to 10000 [ms]
21-Nov-2005
Normal
..\..\ShowAllErrors.htmFirmware 1 Error Index
..\..\ShowAllCommands.htmFirmware 1 Command Index
..\..\ShowAllParameters.htmFirmware 1 Parameter Index